Commercial Performance Coatings 2DM Direct To Metal is a two component polyurethane technology containing anticorrosive pigmentation, which can be applied direct to metal substrates giving a high gloss finish. PRODUCT DESCRIPTION SUBSTRATES & PREPARATION Surfaces showing heavy scale or surface rust should be treated with 971-9119 Protec Metal Conditioner. Heavily rusted surfaces should be abrasively blast cleaned. Commercial Performance Coatings 2DM Direct To Metal can be applied over the following substrates once they have been prepared as follows: It is a high productivity, one layer system that can be applied at high film thicknesses - up to 160μm wet film - with good adhesion to most common substrates such as bare steel, tinplate, iron, stainless steel (blasting recommended) and glass fibre reinforced plastics. Galvanized steel will require an Etch Primer (Refer to substrates and preparation section). Utilizing the SELEMIX® universal tinter system, Commercial Performance Coatings 2DM Direct To Metal is available in a range of colours and gloss levels.